How to Clean Stainless Steel Surfaces?

Tebcal Cleaning

Complete Guide to Cleaning Stainless Steel Surfaces

Stainless steel surfaces are common in many homes and commercial environments because of their durability, corrosion resistance and modern appearance. However, keeping them clean and shiny can be a challenge. In this guide, you’ll learn effective techniques for cleaning and keeping your stainless steel surfaces in top condition, removing stains, fingerprints and water spots.
Tebcal Cleaning
Water flows from the tap to sink

Stainless Steel Kitchen Sink:

  • To remove tough stains or mineral buildup, scrub the sink surface with a mixture of baking soda and water. Leave it on for a few minutes and then rinse with warm water.
  • After cleaning, wipe dry with a microfiber cloth to prevent water spots from forming and to maintain the shine.
Refrigerator Beside White Stove

Stainless Steel Refrigerator:

  • For extra shine, apply a few drops of mineral oil to a soft cloth and wipe it over the surface of the refrigerator. This will help remove fingerprints and leave a shiny finish.
  • If you find stubborn water marks, you can dampen a cloth with white vinegar and gently rub over the stains. Then rinse with clean water and dry thoroughly.
Part of kitchen with paper towels and toaster oven standing on old shabby table

Stainless Steel Oven:

  • To clean grease or burnt food stains on the inside of the oven, make a paste with baking soda and water and apply it to the soiled areas. Let it sit for a few hours or overnight and then wipe with a damp cloth.
  • Use a stainless steel cleaner specifically for the exterior surface of the oven and follow the manufacturer’s instructions for best results.
Person using Dishwasher for Cleaning Plates

Stainless Steel Dishwasher:

  • To prevent water spots from forming in the dishwasher, you can add a little white vinegar to the rinse cycle once a month. This will help keep the surface clean and shiny.
  • After cleaning, dry the surface with a soft cloth to prevent stain formation and maintain the shine of the stainless steel.
Kitchen with Gray and Brick Walls

Stainless Steel Range Hood:

  • If the range hood has metal filters, remove them and clean them regularly with hot water and detergent to remove accumulated grease.
  • Use a stainless steel spray cleaner to remove stains and fingerprints from the exterior surface of the hood. Then wipe dry with a soft cloth to avoid water marks.
Baked Food Close-up Photography


Identify the stainless steel surface:

Before you start cleaning, it is important to identify the type of stainless steel surface you are dealing with. It could be kitchen appliances, faucets, sinks, furniture or commercial surfaces. Proper identification will help you choose the most appropriate cleaning products and techniques.

Recommended cleaning tools and products:

Microfiber cloths: these are soft and will not scratch the surface of stainless steel.
Warm water and mild detergent: Ideal for cleaning surface dirt and grease.
Mineral oil or olive oil: To give an extra shine to the surface once it is clean.

Cleaning techniques:

Basic cleaning: Dampen a microfiber cloth with warm water and mild detergent. Wipe the stainless steel surface in the direction of the grain (if visible), as this helps prevent scratches.
Stain and fingerprint removal: Apply white vinegar to a clean cloth and gently rub over stains and fingerprints. Then wipe with a damp cloth and dry with another clean cloth.
– Dry and shine: After wiping, dry the surface with a clean, soft cloth to prevent water spots from forming. For additional shine, apply a small amount of mineral oil or olive oil to a clean cloth and gently rub over the surface.

Additional tips:

Avoid using abrasive cleaners, steel sponges and hard brushes, as they can scratch the stainless steel surface.
Clean regularly to maintain the shine and appearance of your stainless steel surfaces.
Always follow the manufacturer’s instructions for your stainless steel appliances and furniture to ensure safe and effective cleaning.

Identify the type of surface for the appropriate products. Use soft tools and warm water with detergent to maintain cleanliness and shine. Avoid abrasive cleaners and follow the above steps.

Publicaciones Similares